Làm cho màn hình tài xế hiện đại trở lại
Cái Cụm đồng hồ kỹ thuật số Toyota Alphard 20 Series thay thế cụm đồng hồ nguyên bản bằng màn hình LCD Linux 12.3 inch, 1920×720. Nó mang đến cho bạn góc nhìn kỹ thuật số rõ ràng hơn về tốc độ, vòng tua máy, vị trí số, thông tin nhiên liệu, nhiệt độ, quãng đường và các cảnh báo xe được hỗ trợ, đồng thời giữ cho bố cục bảng điều khiển tích hợp với xe.
Đây là bản nâng cấp cụm đồng hồ hoàn chỉnh, không phải radio Android hay mô-đun chỉ dành riêng cho CarPlay. iKAGOO kiểm tra năm đời xe, ảnh bảng điều khiển, thông số thị trường, vị trí tay lái và cấu hình đầu nối nguyên bản trước khi vận chuyển để có thể chuẩn bị đúng cụm đồng hồ và dây điện tương thích cho đơn hàng của bạn.
Trả lời nhanh
Sản phẩm này là cụm đồng hồ tốc độ LCD toàn phần dành riêng cho dòng xe Toyota Alphard 20, thường được liên kết với bảng táp-lô thế hệ thứ hai được giới thiệu từ 2008 cho đến khi chuyển sang mẫu 2015. Sản phẩm thay thế cụm đồng hồ nguyên bản và hiển thị các thông tin vận hành và xe được hỗ trợ thông qua bố cục kỹ thuật số hiện đại.
Các năm đăng ký có thể chồng chéo giữa các thị trường. Gửi iKAGOO một bức ảnh rõ ràng về cụm đồng hồ và bảng táp-lô hiện tại của bạn trước khi giao hàng. Khách hàng sử dụng bảng táp-lô 2015–2019 đời sau nên sử dụng phiên bản cụm đồng hồ thế hệ mới riêng được hiển thị ở phía dưới trang này.
Bản nâng cấp này thay đổi điều gì cho bạn?
Giá trị không chỉ giới hạn ở màn hình lớn hơn. Bản nâng cấp này thay đổi thông tin bạn nhìn thấy mỗi khi lái xe và mang lại cho khoang lái Alphard đời cũ một giao diện kỹ thuật số gọn gàng, sạch sẽ hơn.
Màn hình 12.3 inch rõ nét
Màn hình rộng 1920×720 giúp hiển thị tốc độ, vòng tua máy, số và thông tin xe dễ nhìn hơn từ vị trí người lái.
Nhiều bố cục hiển thị
Chọn từ nhiều chủ đề và bố cục đồng hồ khác nhau. Bộ chủ đề cụ thể phụ thuộc vào phiên bản cụm đồng hồ được chuẩn bị cho xe của bạn.
Nền tảng Linux chuyên dụng
Cụm đồng hồ sử dụng hệ thống thiết bị Linux chuyên dụng được thiết kế để khởi động nhanh và truy cập trực tiếp thông tin lái xe.
Thông tin xe nguyên bản
Các thông tin được hỗ trợ như tốc độ, vòng tua máy, số, nhiên liệu, nhiệt độ, quãng đường, mức tiêu thụ và cảnh báo tiếp tục được hiển thị.
Chuẩn bị hiển thị theo khu vực
MPH hoặc KM/H, ngôn ngữ giao diện và chi tiết xe theo khu vực có thể được kiểm tra như một phần của quá trình chuẩn bị đơn hàng của bạn.
Phần cứng kết nối tương thích
iKAGOO chuẩn bị cụm đồng hồ và bố trí dây điện phù hợp theo thông tin xe bạn cung cấp.
Hỗ trợ các chức năng gốc của xe
Với phiên bản Alphard chính xác, dây điện phù hợp và lắp đặt đúng cách, cụm đồng hồ được thiết kế để tiếp tục hiển thị thông tin lái xe gốc mà bạn tin cậy.
Tốc độ và RPM
Thông tin tốc độ xe và tốc độ động cơ gốc được hỗ trợ.
Vị trí số
Thông tin vị trí số được hỗ trợ tiếp tục hiển thị trên màn hình kỹ thuật số.
Nhiên liệu và Nhiệt độ
Mức nhiên liệu, nhiệt độ nước làm mát và các thông tin liên quan của xe vẫn khả dụng.
Quãng đường và Dữ liệu chuyến đi
Thông tin đồng hồ đo quãng đường và chuyến đi được hỗ trợ thông qua cấu hình cụm đồng hồ đã chuẩn bị.
Cảnh báo xe
Các chỉ báo cảnh báo được hỗ trợ và thông tin trạng thái xe tiếp tục được hiển thị.
Dữ liệu tiêu thụ nhiên liệu
Các trang tiêu thụ nhiên liệu và thông tin lái xe được hỗ trợ vẫn có sẵn.
Các nút điều khiển trên vô-lăng
Các điều khiển thiết bị trên vô lăng gốc vẫn được hỗ trợ nếu được trang bị.
Thông tin hybrid và 4WD
Thông tin về năng lượng hybrid hoặc dẫn động bốn bánh được hỗ trợ khi có sẵn từ cấu hình xe nguyên bản.
Bảo vệ hệ thống dây điện trong nhà máy
Bộ dây nối phù hợp được thiết kế để kết nối mà không cố ý cắt hệ thống dây điện chính của xe nguyên bản được hỗ trợ.
Xem Cụm đồng hồ, Vỏ và Phần cứng kết nối
Những hình ảnh này cho thấy cụm đồng hồ vật lý, vỏ phía sau, cấu trúc màn hình và phần cứng kết nối được cung cấp cho việc nâng cấp.
Nhiều bố cục với hệ thống đồng hồ Linux chuyên dụng
Cụm đồng hồ được xây dựng dựa trên hệ thống Linux chuyên dụng thay vì nền tảng giải trí Android đa năng. Điều này giữ trọng tâm vào dữ liệu lái xe, bố cục đồng hồ và truy cập nhanh vào thông tin thiết yếu.
Tại sao sản phẩm này đáng mua
Nâng cấp cho sử dụng hằng ngày
Cụm đồng hồ nằm ngay trước mặt bạn mỗi khi lái xe. Màn hình rộng hơn và bố cục được chỉnh sửa hiển thị trong mọi hành trình, không chỉ khi sử dụng một ứng dụng cụ thể.
Giải pháp MPH hoàn chỉnh hơn
Đối với xe nhập khẩu, bộ chuyển đổi MPH nhỏ có thể giải quyết một vấn đề. Cụm đồng hồ kỹ thuật số đầy đủ có thể kết hợp chuẩn bị đơn vị với nâng cấp hình ảnh và thông tin rộng hơn.
Không chỉ sửa chữa màn hình cũ
Sửa chữa cụm đồng hồ gốc khôi phục trải nghiệm ban đầu. Sản phẩm này dành cho những chủ xe cũng muốn có màn hình điều khiển hiện đại và bố cục có thể lựa chọn.
Dành cho chủ sở hữu lâu dài
Nếu bạn dự định giữ chiếc Alphard của mình, việc nâng cấp giao diện người lái có thể khiến xe cảm giác hiện đại hơn mà không làm thay đổi sự thoải mái và không gian mà bạn đã trân trọng.
Ba đánh giá mua hàng iKAGOO
Những đánh giá này giúp bạn hiểu được giá trị thực tế, sự tích hợp trên xe và công việc lắp đặt trước khi đặt hàng.
Sự cần thiết phải nâng cấp iKAGOO
Đây là một nâng cấp mạnh mẽ cho những chủ sở hữu muốn có màn hình lái hiện đại hơn, thông tin hàng ngày rõ ràng hơn và diện mạo bảng điều khiển kỹ thuật số hoàn chỉnh.
- Màn hình đồng hồ được sử dụng trong mỗi hành trình.
- Bố cục 12.3 inch giúp thông tin lái xe cốt lõi dễ quan sát hơn.
- Nhiều chủ đề mang lại sự trình bày cá nhân hơn cho khoang lái.
- MPH/KM/H preparation can be valuable for imported vehicles.
- It suits owners planning to keep and continue improving the vehicle.
Sản phẩm này được đánh giá theo khung tiêu chí “Sự cần thiết của việc nâng cấp” của iKAGOO, trong đó xem xét tình trạng hệ thống nhà máy, việc cải thiện trải nghiệm sử dụng hàng ngày, giá trị sở hữu lâu dài, các lựa chọn thay thế hiện có và giá trị thực tiễn của việc nâng cấp.
Đọc khung “Sự cần thiết của việc nâng cấp iKAGOO”
Khả năng tương thích với các dòng xe của iKAGOO Original
When the correct 20 Series version is prepared, the cluster is designed to integrate supported speed, RPM, gear, fuel, temperature, mileage, consumption, warning and steering-control information into the new digital display.
- Vehicle data is received through the prepared vehicle interface.
- The display replaces the original instrument position rather than adding a loose external screen.
- The matched harness protects the supported factory wiring from unnecessary cutting.
- Dashboard photos and connector details help iKAGOO separate 20 Series and later-generation versions.
- Regional units and language requirements can be checked before shipment.
Kết quả này dựa trên khung tiêu chuẩn tương thích với xe nguyên bản của iKAGOO. Khung tiêu chuẩn này đánh giá tính liên tục của các chức năng nguyên bản, các bộ điều khiển nguyên bản, việc tích hợp dữ liệu xe và các cảnh báo, kiến trúc vật lý, trải nghiệm tương tác theo phong cách nguyên bản và khả năng tích hợp khi lắp đặt.
Kết quả này phản ánh chất lượng tích hợp tổng thể của quá trình nâng cấp. Điều này không có nghĩa là tỷ lệ phần trăm các chức năng gốc bị mất đi hoặc được giữ lại là như nhau.
Tìm hiểu về khung tiêu chuẩn tương thích xe hơi gốc của iKAGOO
Mức độ khó khi cài đặt iKAGOO
Installation requires careful removal of the original instrument assembly, correct wiring identification, vehicle-data testing and verification of mileage, warning indicators and power behavior.
- Dashboard trim and the original cluster must be removed carefully.
- The original connector must be compared with the supplied harness before connection.
- Units, language and vehicle settings must be checked.
- Speed, RPM, gear, fuel, temperature and warning functions must be tested.
- The installer should confirm normal shutdown and vehicle sleep behavior.
Mức độ cài đặt cao hơn phản ánh mức độ công việc chuyên môn cần thiết. Điều này không có nghĩa là chất lượng sản phẩm thấp hơn, khả năng tương thích kém hơn hay giá trị nâng cấp thấp hơn.
This installation level is assigned under the iKAGOO Car Electronics Installation Difficulty framework. It considers dashboard disassembly, wiring connections, cable routing, CANBUS configuration, function testing, power behavior and the level of installer experience required.
Mức độ khó lắp đặt phản ánh khối lượng công việc cần thiết để hoàn tất việc lắp đặt một cách chính xác. Điều này không đồng nghĩa với việc chất lượng sản phẩm kém hơn hay giá trị nâng cấp thấp hơn.
Tìm hiểu khung đánh giá mức độ khó cài đặt của iKAGOO
Choose the Correct Alphard Generation Before Ordering
Alphard registration years can overlap between regions. The dashboard shape and original instrument assembly are more reliable than the registration year alone.
Alphard 20 Series / AH20
This page is intended for the second-generation Alphard dashboard commonly associated with approximately 2008–2015 vehicles. Provide a clear front photo of your original cluster and dashboard so iKAGOO can confirm the correct housing and connection version.
Alphard 2015–2019
Vehicles using the later third-generation dashboard require the separate 2015–2019 cluster product. Do not select only by registration year.
Toyota Alphard 20 Series Digital Cluster Specifications
| Loại sản phẩm | Full LCD digital instrument cluster |
|---|---|
| Primary Vehicle Application | Toyota Alphard 20 Series / AH20, subject to dashboard and connector confirmation |
| General Model Period | Approximately 2008–2015 second-generation dashboard; registration years may vary by market |
| Kích thước màn hình | 12,3 inch |
| Nghị quyết | 1920 × 720 |
| Display Construction | OGS IPS |
| Góc nhìn | Up to 178° reference |
| Hệ điều hành | Dedicated Linux instrument system |
| Processing Platform | Four-core platform |
| Chủ đề hiển thị | Multiple themes and layouts; exact set depends on the prepared version |
| Thông tin lái xe | Speed, RPM, gear, fuel, temperature, mileage, trip and supported consumption data |
| Tình trạng xe | Supported warning indicators and vehicle-status information |
| Đơn vị | MPH or KM/H preparation/configuration subject to vehicle version |
| Ngôn ngữ | Multilingual interface; confirm the required language before shipment |
| Tương tác vô lăng | Supported original instrument-control buttons where equipped |
| Dây điện | Matched plug-in wiring arrangement prepared for the confirmed vehicle version |
| Mã sản phẩm | FD-132 |
| Listed Product Weight | 6 kg |
| Kích thước gói hàng được liệt kê | 48 × 38 × 28 cm |
Cách iKAGOO chuẩn bị phiên bản chính xác
The current purchase area uses one ordering route. The physical cluster and connection arrangement are prepared according to the vehicle information you provide rather than by inventing unsupported online variations.
Full Digital Cluster or Another Solution?
| Tùy chọn | Điểm mạnh của sản phẩm | Những điều cần lưu ý |
|---|---|---|
| Sửa chữa cụm đồng hồ gốc | Restores the original display and factory appearance. | It does not provide the wider digital interface or selectable modern layouts. |
| Used original cluster | Maintains the original Toyota design. | Version, mileage, coding, age and previous vehicle data may need attention. |
| Small MPH converter or HUD | A simpler solution when the only goal is seeing MPH. | It remains an additional display and does not modernize the complete instrument area. |
| Mô-đun chỉ hỗ trợ CarPlay | Adds phone navigation, music and calling to the entertainment system. | It does not replace the driver’s instrument cluster. |
| Cụm đồng hồ kỹ thuật số iKAGOO | Upgrades the complete driver display with a wide LCD layout and supported original vehicle information. | Correct generation selection and professional installation are required. |
What Is Prepared for Your Order
Based on the product hardware shown on this page, the order is centered on the complete instrument-cluster assembly and the applicable connection hardware. Exact package contents are confirmed for the vehicle version prepared for shipment.
LCD Cluster Assembly
The complete screen and housing assembly prepared for the confirmed dashboard version.
Phần cứng kết nối tương thích
Applicable power, data and vehicle-interface connections selected for the confirmed configuration.
Order-Specific Preparation
Version, regional display requirements and provided vehicle details are checked before shipment.
Professional Installation Process
Use an installer experienced with instrument clusters, vehicle data systems and interior trim. Record the original mileage and photograph all original settings before removing the factory cluster.
Xác nhận phương tiện
Compare the vehicle, original dashboard, cluster shape, steering position and connectors with the order information.
Record Original Information
Photograph the current odometer, warning-light state, units and original instrument operation before disassembly.
Xóa cụm ban đầu
Protect the dashboard and trim, disconnect the vehicle battery as appropriate and remove the original assembly carefully.
So sánh tất cả các đầu nối
Do not connect by force. Confirm that connector shape, pin arrangement, interface labels and wiring match the prepared instructions.
Connect and Configure
Install the matched wiring, power the cluster and apply the applicable vehicle, language and unit settings.
Test All Driving Information
Check speed, RPM, gear, fuel, temperature, mileage, steering controls and warning indicators before refitting all trim.
Complete the Power Test
Switch the vehicle off, confirm normal cluster shutdown and verify that the vehicle enters its normal sleep state.
Finish the Installation
Refit all trim only after the display, data, warnings, controls and power behavior have been checked successfully.
Hãy tạm dừng quá trình cài đặt và liên hệ với iKAGOO nếu:
Pausing at this stage protects the vehicle and the product. Send clear connector photos and a short video to iKAGOO so the correct connection guidance can be provided.
Support Before and After Installation
Chuẩn bị cấu hình phương tiện
iKAGOO checks the supplied model, year, dashboard, instrument and regional information before shipment.
Theo dõi vận chuyển quốc tế
Orders are shipped with tracking. Processing begins after payment and the required vehicle information are received.
12-Month Bảo hành phần cứng
Eligible hardware faults are handled under the current iKAGOO warranty terms from the confirmed delivery date.
Hướng dẫn lắp đặt
Connection, configuration and troubleshooting support is available when the installer provides clear photos and test information.
Dịch vụ hậu mãi
iKAGOO assists with reasonable setup and function checks according to the confirmed vehicle configuration.
Compatibility Resolution
If iKAGOO confirmed compatibility from accurate information and no reasonable installation solution is available after troubleshooting, the current refund policy applies.
Toyota Alphard 20 Series Digital Cluster FAQ
Does this fit my exact Toyota Alphard?
This page is intended for the Alphard 20 Series dashboard. Registration years can overlap with later models, so iKAGOO checks your current cluster photo, dashboard, steering position, drivetrain and connector configuration before shipment.
Tôi cần cung cấp những thông tin nào về phương tiện?
Provide the model, registration year, clear front photo of the original cluster, wide dashboard photo, LHD/RHD, petrol or hybrid configuration, required MPH/KM/H, language and a photo of the current odometer.
Is this a complete instrument cluster or a CarPlay module?
It is a complete full-LCD instrument-cluster replacement. It is not an Android head unit, car radio or CarPlay-only module.
Can the cluster display MPH instead of KM/H?
MPH or KM/H requirements can be checked during order preparation. Tell iKAGOO which unit you need and provide your vehicle’s market specification.
What happens to the vehicle mileage?
Photograph and record the original odometer before removing the factory cluster. Mileage handling can depend on the vehicle and cluster version, so confirm the required process with iKAGOO and your installer before installation. The owner and installer remain responsible for complying with local mileage-disclosure laws.
Các nút điều khiển trên vô-lăng nguyên bản có được hỗ trợ không?
Supported original steering-wheel instrument controls continue to work through the prepared vehicle interface where the vehicle is equipped with those controls.
Will the original warning information still be displayed?
Supported warning indicators and vehicle-status information continue to be displayed after correct connection and configuration. The installer should test every warning state before completing the dashboard reassembly.
Are hybrid or four-wheel-drive screens supported?
Applicable hybrid-energy and four-wheel-drive information can be displayed when the original vehicle provides the required data and the correct version is prepared. Include the drivetrain information with your order.
Việc lắp đặt có cần phải cắt dây điện nguyên bản không?
The matched harness is designed to connect without intentionally cutting the supported factory main wiring. Stop installation and contact iKAGOO if cutting or forcing an incompatible connector appears necessary.
Có cần phải lắp đặt chuyên nghiệp không?
Professional installation is recommended. The work involves instrument removal, trim protection, connector verification, data testing, mileage handling and vehicle sleep testing.
How many display themes are included?
The product supports multiple themes and layouts. Media from different prepared versions shows different theme counts, so the exact theme set is confirmed according to the software version supplied with your order.
Does the cluster include Android apps or built-in CarPlay?
The standard product described here is a dedicated Linux instrument cluster, not a general Android entertainment device. Any navigation, media or phone-projection display shown in reference media depends on the specific external source and prepared interface and should be confirmed before ordering.
Gói sản phẩm bao gồm những gì?
The package is centered on the LCD instrument-cluster assembly and the applicable connection hardware prepared for the confirmed vehicle version. Exact supplied items are confirmed with the order.
Chính sách bảo hành như thế nào?
The product is covered by the current iKAGOO 12-month hardware warranty from the confirmed delivery date. Eligibility, return shipping, repair and replacement handling follow the current published warranty policy.
What happens if the prepared version cannot be installed?
Provide accurate vehicle information before purchase and cooperate with installation troubleshooting. If iKAGOO confirmed compatibility from accurate information and no reasonable installation solution remains after troubleshooting, the case is handled under the current iKAGOO refund policy. Incorrect information, undisclosed modifications and vehicle-specific limitations are not promoted as unconditional return-and-refund cases.
Review the Preparation and Support Standards
Upgrade Your Alphard Driver Display with the Correct Version
Choose the current purchase option, provide your vehicle and dashboard information, and let iKAGOO prepare the applicable cluster, display configuration and connection arrangement for your order.
Daniel Navarro –
Đã lắp đặt trong chiếc Alphard của tôi từ 2010. Nhiên liệu, số km và cảnh báo đều hiển thị rõ ràng.